TB/T 1404-2008 铁路液压捣固机和液压道岔捣固机通用技术条件
作者:标准资料网 时间:2024-05-29 13:48:53 浏览:8577
来源:标准资料网
基本信息
标准名称: | 铁路液压捣固机和液压道岔捣固机通用技术条件 |
英文名称: | General technical conditions of railway hydraulic tamping machine and hydraulic switch tamping machine |
中标分类: |
铁路 >>
铁路建筑设备 >>
铁路养路机械 |
ICS分类: |
铁路工程 >>
铁路/架空索道建筑和维护设备
|
替代情况: | 替代TB/T 1404-1999;部分代替TB/T 2479.4-1993 |
发布部门: | 中华人民共和国铁道部 |
发布日期: | 2008-09-06 |
实施日期: | 2008-12-01 |
首发日期: | |
作废日期: | |
主管部门: | 铁道部标准计量研究所 |
提出单位: | 铁道部标准计量研究所 |
归口单位: | 铁道部标准计量研究所 |
起草单位: | 什邡瑞邦机械有限责任公司、沈阳铁路局沈阳工务器材厂、锦州铁工养路设备有限公司 |
起草人: | 张代军、樊尚君、何发明、金立全、曲培志 |
出版社: | 中国铁道出版社 |
出版日期: | 2008-12-01 |
页数: | 9页 |
书号: | 15113·2797 |
适用范围
本标准规定了铁路液压捣固机和液压道岔捣固机的基本形式和主要参数、要求、试验方法、检验规则、标志、包装。
本标准适用于偏心激振、同步捣固、在轨道上推行的铁路液压捣固机和液压道岔捣固机。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 铁路 铁路建筑设备 铁路养路机械 铁路工程 铁路/架空索道建筑和维护设备
【英文标准名称】:Connectionsforgeneraluseandfluidpower.PortsandstudendswithISO261threadswithelastomericormetal-to-metalsealing.Threadedports
【原文标准名称】:普通和液压传动用联接件.用ISO261弹性螺纹或金属与金属间密封的气门和双头螺栓端头.螺纹气门
【标准号】:BSENISO9974-1-2000
【标准状态】:现行
【国别】:英国
【发布日期】:2000-08-15
【实施或试行日期】:2000-08-15
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:紧配合螺纹;压合接头;定义(术语);设计;名称与符号;尺寸规格;排放旋塞;架设(施工作业);紧固件;液压管路;流体技术;孔;液压传动;维护;材料;中型;米制的;开口;管接头;管连接件;管道配件;管螺纹;管;端口;纵断封装环;螺塞;螺纹连接;螺纹栓塞;旋入式;螺纹件;螺钉(螺栓);密封环;密封件;尺寸;规范;标准耦合器;储存;螺纹孔;榫舌;螺纹;公差(测量);阀门;惠氏(螺纹);惠氏管螺纹
【英文主题词】:Close-fitthreads;Compressionfittings;Definitions;Design;Designations;Dimensions;Draw-offtaps;Erecting(constructionoperation);Fasteners;Fluidcircuits;Fluidtechnology;Holes;Hydraulicfluidpower;Maintenance;Materials;Medium-duty;Metric;Openings;Pipeconnections;Pipecouplings;Pipefittings;Pipethreads;Pipes;Ports(openings);Profilesealingrings;Screwplugs;Screwedconnections;Screwedplugs;Screwing-in;Screwings;Screws(bolts);Sealingrings;Seals;Size;Specification;Standardcouplings;Storage;Tappedholes;Tenons;Threads;Tolerances(measurement);Valves;Whitworth;Whitworthpipethreads
【摘要】:ThispartofISO9974specifiesdimensionsforportswithISO261threadsandelastomeric(typeE)ormetal-to-metal(typeB)sealingforgeneraluseandinfluidpowerapplicationswiththestudendsdetailedinISO9974-2andISO9974-3.Italsospecifiestestmethodsandthedesignationoftheseports.PortsinaccordancewiththispartofISO9974maybeusedatworkingpressuresupto63MPa(630bar).Thepermissibleworkingpressuredependsupontheportsize,materials,design,workingconditions,ap-plication,etc.Forthreadedportsandstudendsspecifiedinnewdesignsinhydraulicfluidpowerapplications,onlyISO6149istobeused.ThreadedportsandstudendsinaccordancewithISO1179,ISO9974andISO11926arenottobeusedfornewdesignsinhydraulicfluidpowerapplications.note:1)1bar=0,1MPa=10pa;1MPa=1N/mm
【中国标准分类号】:J20
【国际标准分类号】:23_100_60
【页数】:14P.;A4
【正文语种】:英语
【英文标准名称】:StandardTestMethodsforElasticityorToughnessofVarnishes
【原文标准名称】:清漆弹性或韧性的试验方法
【标准号】:ASTMD1642-1993
【标准状态】:作废
【国别】:
【发布日期】:1993
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:D01.33
【标准类型】:(TestMethod)
【标准水平】:()
【中文主题词】:涂料;涂层;韧性;涂漆;试验;清漆;弹性(流体)
【英文主题词】:Elasticity;Linseedoil;Pentaerythritol;Reducedvarnish;Resinreduction;Run-Kaurireduction;Toughness;Varnishes;elasticity/toughness-varnishes,test;NumberCode87.040(Paintsandvarnishes)
【摘要】:1.1Thesetestmethodscoverthedeterminationofelasticityortoughnessofanyvarnishwhichismisciblewiththediluentsspecified,undertheconditionsofthetest.1.2Thisstandarddoesnotpurporttoaddressallofthesafetyproblems
【中国标准分类号】:G51
【国际标准分类号】:87_040
【页数】:3P.;A4
【正文语种】: