GB/T 13489-1992 橡胶涂覆织物燃烧性能测定
作者:标准资料网 时间:2024-04-28 23:47:57 浏览:9678
来源:标准资料网
基本信息
标准名称: | 橡胶涂覆织物燃烧性能测定 |
英文名称: | Rubber coated fabrics-Determination of the burning behaviour |
中标分类: |
化工 >>
橡胶制品及其辅助材料 >>
胶管、胶带、胶布 |
ICS分类: |
环保、保健与安全 >>
消防 >>
材料和制品的阻燃性和燃烧性能
|
替代情况: | 被GB/T 13489-2008代替 |
发布部门: | 国家技术监督局 |
发布日期: | 1992-06-09 |
实施日期: | 1993-06-01 |
首发日期: | 1992-06-09 |
作废日期: | 2008-10-01 |
主管部门: | 中国石油和化学工业协会 |
归口单位: | 全国橡胶与橡胶制品标准化技术委员会 |
起草单位: | 沈阳橡胶工业研究所 |
出版社: | 中国标准出版社 |
出版日期: | 1993-06-01 |
页数: | 平装16开, 页数:10, 字数:15千字 |
适用范围
本标准规定了垂直向橡胶涂覆织物试样受小火焰作用的原理、仪器、试样、试验步骤和结果等。本标准适用于各种橡胶涂覆的棉纤维、尼龙纤维、聚酯纤维等材料或制品的燃烧性能试验,也适用于涂覆织物材料燃烧性能的质量控制和配方对比试验。以橡胶为主的橡塑并用涂覆织物材料或制品的燃烧性能试验也应参照使用。本标准不适用评定实际使用条件下的着火危险性。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 化工 橡胶制品及其辅助材料 胶管 胶带 胶布 环保 保健与安全 消防 材料和制品的阻燃性和燃烧性能
【英文标准名称】:Windturbines-Part25-3:Communicationsformonitoringandcontrolofwindpowerplants-Informationexchangemodels(IEC61400-25-3:2006);GermanversionEN61400-25-3:2007,textinEnglish
【原文标准名称】:风力涡轮机.第25-3部分:风力发电站的监测和控制用通信.信息交换模型
【标准号】:DINEN61400-25-3-2007
【标准状态】:现行
【国别】:德国
【发布日期】:2007-11
【实施或试行日期】:2007-11-01
【发布单位】:德国标准化学会(DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:通信;通信系统;通信技术;控制工程;控制工艺学;数据交换;定义;效率;电气工程;英语;信息交流;信息交换;信息模型;测量;测量技术;监测;性能;发电站;功率测量;电功率测量;过程控制;规格试验;风力;风力发电站;风力涡轮机发电系统;风力涡轮机
【英文主题词】:Communication;Communicationsystems;Communicationtechnology;Controlengineering;Controltechnology;Dataexchange;Definition;Definitions;Efficiency;Electricalengineering;Englishlanguage;Informationexchange;Informationinterchange;Informationmodels;Measurement;Measuringtechniques;Monitoring;Performance;Powergeneratingplants;Powermeasurement;Powermeasurement(electric);Processcontrol;Ratingtests;Windpower;Windpowerstations;Windturbinegeneratorsystems;Windturbines
【摘要】:ThispartofIEC61400-25providestheinformationexchangemodelsthatcanbeappliedbyaclientandaservertoaccessthecontentandstructureofthewindpowerplantinformationmodeldefinedinIEC61400-25-2.Clause6givesanoverviewoftheinformationexchangemodelsforoperationalfunctionsandmanagementfunctions.Clause7introducestheinformationexchangemodelsforoperationalfunctions:authorisation,control,monitoring,andreportingandlogging.Clause8givesanoverviewoftheinformationexchangemodelsformanagementfunctions.Clause9providesthedetailsoftheservicesforthefollowingservicemodelclasses:·Applicationassociation,·Serverclass,·LogicalDeviceclass(retrievetheself-description,etc.),·LogicalNodeclass(retrievetheself-description,etc.),·Dataclass(getvalues,setvalues,retrievetheself-description,etc.),·DataSetclass(getvalues,setvalues,createdatasets,retrievetheself-description,etc.),·ReportControlBlockclass(getattributes,setattributes,report,etc.),·LogControlBlockandLogclasses(getattributes,setattributes,retrievelogentries,etc.),·Controlclass(select,operate,etc.).AnnexAprovidesexamplesofthereportingandloggingservicesrequired.AnnexBprovidesRelationshipbetweenACSIServicesandFunctionalConstraints.AnnexCprovidesRelationshipbetweenACSIdefinedinIEC61850-7-2andIEC61400-25-3.
【中国标准分类号】:F11
【国际标准分类号】:27_180
【页数】:34P.;A4
【正文语种】:英语
【英文标准名称】:Non-destructivetesting-Performance-basedqualification
【原文标准名称】:无损探伤.性能鉴定
【标准号】:ISO/TS11774-2011
【标准状态】:现行
【国别】:国际
【发布日期】:2011-11
【实施或试行日期】:
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/TC135
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:Capability;Definitions;Evaluations;Furthereducation;Inspectors;Materialstesting;Non-destructivetesting;Personnel;Qualifications;Specification(approval);Testingpersonnel;Training
【摘要】:
【中国标准分类号】:H26
【国际标准分类号】:03_100_30;19_100
【页数】:11P;A4
【正文语种】:英语